Glossary · Commercial real estate
Floor area ratio (FAR)
Total building floor area divided by lot area; the zoning number that caps how much you can build.
What it means
Floor area ratio is the ratio of a building’s total gross floor area to the area of the lot it sits on. A town that caps FAR at 0.4 in an industrial district allows 40,000 square feet of building on a 100,000 square foot lot, whether as one story covering 40 percent of the lot or two stories covering 20 percent. Together with height, setbacks, lot coverage, and parking, FAR defines the maximum building envelope and therefore the land’s development value.
Why it matters on the South Shore
Many South Shore towns regulate commercial districts with lot coverage, height, and parking rather than FAR, but Quincy, Braintree, and Brockton use FAR in their denser business and mixed-use districts, and several towns wrote FAR limits into their new MBTA Communities districts. Where FAR applies, it is often the number that decides whether a redevelopment pencils. A buyer who assumes “three stories on the whole lot” and later discovers an FAR of 1.0 has lost a third of the project before the first hearing.
In practice
A 30,000 square foot lot in a Quincy business district carries a 1.5 FAR. The maximum building is 45,000 square feet. A developer planning ground-floor retail and three floors of apartments at 950 square feet per unit nets roughly 35 apartments after circulation and 8,000 square feet of retail. If a special permit allows FAR of 2.0, the same lot supports 60,000 square feet and about 50 units, which moves the land value by several hundred thousand dollars.
Straight answers
- How is floor area ratio calculated?
- Divide the gross floor area of all buildings on the lot by the lot's land area. A 20,000 square foot building on a 40,000 square foot lot has an FAR of 0.5. Each town's bylaw defines what counts as floor area; basements, parking structures, and mechanical space are often excluded, so read the definition before you run the math.
- Is FAR or lot coverage the bigger constraint?
- It depends on the building type. For single-story industrial and retail, lot coverage and parking usually govern long before FAR does. For multistory office, mixed-use, or multifamily, FAR is often the ceiling. Run both, plus height and setbacks, and the tightest one tells you what the site can actually hold.
Related terms
-
Lot coverage
The percentage of a lot that buildings, and sometimes pavement, may cover under the zoning bylaw.
-
Zoning
The town's rules for what can be built and operated at a given address.
-
Highest and best use
The legal, feasible, and most profitable use of a property, which sets its value.
-
Setback
The minimum distance a building must sit from a lot line, street, or other feature under the zoning bylaw.
Where this term shows up
Terms that point here: Density bonus · Gross building area (GBA)
← All 537 terms · Talk to a licensed advisor about your deal →