Innovative Commercial Strategies Innovative Commercial Strategies CRE Advisory + AI Systems

Glossary · Commercial real estate

Load factor (common area factor)

The percentage added to usable space to arrive at rentable space.

What it means

The load factor is the ratio of a building’s rentable area to its usable area, expressed as the percentage of common area allocated to each tenant. It converts the space a tenant occupies into the space a tenant pays for.

Why it matters on the South Shore

South Shore professional buildings vary widely in load because many were converted from other uses. Two buildings on the same Quincy block can carry 12 and 22 percent factors. Our Lease Deal Analyzer accepts either rentable or usable input so the comparison stays honest.

In practice

Usable 1,500 square feet, load factor 18 percent: rentable 1,770 square feet. At $24 per rentable foot the annual rent is $42,480, or $28.32 per usable foot.

Straight answers

What is a typical load factor?
Ten to twenty percent in multi-tenant office and medical buildings, lower in buildings with minimal common areas and higher in buildings with large lobbies, fitness rooms, or shared conference space. Above 20 percent deserves a question.
Can I negotiate the load factor?
Indirectly. You can negotiate the rent per rentable foot down to offset a high load, ask the landlord to cap the factor, or insist on a measurement under a recognized standard. Comparing buildings on cost per usable foot removes the distortion.

Related terms

Where this term shows up

In a lease: Measurement and load factor (Lease Clause Decoder)

Terms that point here: Price per square foot · Gross building area (GBA) · Gross leasable area (GLA)

← All 537 terms · Talk to a licensed advisor about your deal →

Hearing this term in a deal right now?

Call before you sign. A straight read on the clause, the number, or the pitch, usually in one conversation.